sav-con ? connector savers www.glenair.com e-mail: sales@glenair.com g-20 glenair, inc. ? 1211 air way ? glendale, ca 91201-2497 ? 818-247-6000 ? fax 818-500-9912 ? 2004 glenair, inc. printed in u.s.a. cage code 06324 metric dimensions (mm) are indicated in parentheses. b emi ground spring (optional) interfacial seal 1.750 (44.5) max receptacle end lock ring (optional) plug end a 94 0 l 006 m 16 g 24 p n 131 series no. class 0 = general duty 1 = environmental 2 = hi rel l = lock ring (optional) - = standard basic part no. finish symbol (see page g-6) modification code* (omit for none) alternate position 1 thru 10 - (n = normal) p = pins, plug side s = sockets, plug side insert arrangement g = emi ground spring (optional) - = standard shell size sav-con ? connector savers mil-dtl-83723 series iii, bayonet coupling *add modification code 131 for dry lubricant on inside surfaces of coupling nut. may not be suitable for space applications. shell size 08 10 12 14 16 18 20 22 24 a max .536 (13.6) .659 (16.7) .829 (21.1) .898 (22.8) 1.025 (26.0) 1.131 (28.7) 1.256 (31.9) 1.381 (35.1) 1.506 (38.3) b max .776 (19.7) .906 (23.0) 1.078 (27.4) 1.141 (29.0) 1.266 (32.2) 1.375 (34.9) 1.510 (38.4) 1.625 (41.3) 1.760 (44.7) table i
www.glenair.com e-mail: sales@glenair.com g-21 glenair, inc. ? 1211 air way ? glendale, ca 91201-2497 ? 818-247-6000 ? fax 818-500-9912 ? 2004 glenair, inc. printed in u.s.a. cage code 06324 sav-con ? connector savers sav-con ? connector savers mil-dtl-83723 series iii, bayonet coupling in alternate positions, the pin insert rotates clockwise while the socket insert rotates counterclockwise the same number of degrees relative to the center line of the master key or keyway. face view receptacle position n, 6 thru 10 d c b a e rotated pin insert position 1 thru 5 c l insert arrangements insert arrangement dash no. 08-02 08-03 08-98 10-05 10-02 10-06 10-20 12-03 12-12 14-04 14-07 14-12 14-15 16-10 16-24 18-08 18-14 18-31 20-16 20-25 20-28 20-39 20-41 22-12 22-19 22-32 22-39 22-55 24-19 24-43 24-57 24-61 shell size desig 20 2 3 3 5 2 6 2 12 9 15 24 31 19 24 37 41 26 27 55 23 55 61 16 3 7 3 10 14 16 2 19 12 20 12 4 8 6 4 12 6 19 2 contact size: quantity 24 08 10 12 14 16 18 20 22 b o 140 140 140 140 140 140 132 118 140 155 115 insert position e o 0 10 20 30 40 50 0 0 0 0 0 n= normal 1 2 3 4 5 6 7 8 9 10 d o 265 - - - - - 320 312 275 304 - a o 105 - - - - - 102 80 35 64 - b o 140 - - - - - 132 118 140 155 - c o 210 - - - - - 248 230 205 234 - size 8 d o 265 265 265 265 265 265 320 312 275 304 270 a o 105 105 105 105 105 105 102 80 35 64 25 c o 215 215 215 215 215 215 248 230 205 234 220 size 10 d o 265 265 265 265 265 265 259 342 334 240 336 a o 105 105 105 105 105 105 18 92 84 24 98 b o 140 140 140 140 140 140 149 152 152 135 152 c o 215 215 215 215 215 215 192 222 204 199 268 sizes 12 thru 24 alternate keyway positions
|
